Get Started 350-601 Exam [2023] Dumps Cisco PDF Questions [Q110-Q131]

Get Started: 350-601 Exam [2023] Dumps Cisco PDF Questions

350-601 Premium Exam Engine pdf Download

NEW QUESTION # 110
What is an advantage of using Ansible for automation as compared to Puppet and Chef?

A. Ansible performs automation without installing a software agent on the target node.
B. Ansible automates the enforcement of configuration settings.
C. Ansible abstracts a scenario so that one set of configuration settings can be used across multiple operating systems.
D. Ansible configures a set of CLI commands on a device by using NETCONF.

Answer: A

Explanation:
Section: Automation

NEW QUESTION # 111
An engineer is deploying a VXLAN EVPN environment for a customer. The customers environment suffers from a large amount of flooding related to hosts attempting to resolve the MAC to IP mapping on the network segment. Which feature prevents this issue from happening in the future?

A. IP ARP SYNC
B. anycast gateway
C. anycast rendezvous point
D. IP ARP suppression

Answer: D

NEW QUESTION # 112
Drag and drop the firmware packages from the left onto the software bundles they belong to on the right.

Answer:

Explanation:

NEW QUESTION # 113
Refer to the exhibit.

Which backup operation type does not include the Preserve Identities feature?

A. all configuration
B. system configuration
C. full state
D. logical configuration

Answer: C

NEW QUESTION # 114
What is a recommended design choice in a topology for multipathing iSCSI traffic?

A. two NICs bended together on the initiator
B. dual initiators to a single target with bonded interfaces
C. single initiator to dual targets
D. initiators and targets in separate subnets

Answer: C

Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus1000/sw/4_2_1_s_v_1_5_1/ system_management/configuration/guide/n1000v_system/n1000v_system_13iscsi.html#wp1052813

NEW QUESTION # 115
Refer to the exhibit.

Refer to the exhibit. A secure server that provides services to EPG-2 must be placed in EPG-1. The remaining EPGs-EPG-2, EPG-3. and EPG-4-must communicate without any contracts. Which set of actions accomplishes this goal?

A. Option A
B. Option D
C. Option B
D. Option C

Answer: C

NEW QUESTION # 116
Refer to the exhibit.

What is the result of implementing this configuration?

A. The Fibre Channel interface is configured for SPAN.
B. The Fibre Channel interface is configured for FSPF.
C. The Fibre Channel interface is configured for synchronization distribution.
D. The Fibre Channel interface is configuration for source distribution.

Answer: A

NEW QUESTION # 117
Which two configuration settings are available in the in the cisco UCS flmware Auto sync server policy?

A. No Action
B. User Notification
C. Delayed Action
D. Immediate Action
E. User Acknowledge

Answer: A,E

Explanation:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/firmware-mgmt/gui/2-2/b_GUI_Firmware_Management_22/b_GUI_Firmware_Management_22_chapter_01111.pdf Following are the values for the Firmware Auto Sync Server policy: * User Acknowledge-Firmware on the server is not synchronized until the administrator acknowledges the upgrade in the Pending Activities dialog box. * No Action-No firmware upgrade is initiated on the server.

NEW QUESTION # 118
A network engineer must implement RBAC on Cisco MDS 9000 Series Multilayer Switches.
Drag and drop the Cisco MDS 9000 Series roles from the left onto the correct categories on the right.

Answer:

Explanation:

NEW QUESTION # 119
Which protocol does Cisco Hyperflex use to share data among nodes in a VMware vSphere environment?

A. FCoE
B. SMB
C. CIFS
D. NFS

Answer: D

NEW QUESTION # 120
An engineer must configure a Cisco UCS blade system that is managed by Cisco UCS Manager. All four connected interfaces between the blade system and the fabric interconnects must be used. Additionally, the connectivity must tolerate any link failure between the l/O module and the fabric interconnects. Which action accomplishes these requirements?

A. Configure port aggregation with LACP policy set to default
B. Configure Firmware Auto Sync Server policy to Auto Acknowledge
C. Configure chassis/FEX discovery pokey action to four links
D. Configure Link Group Preference to Port Channel.

Answer: C

NEW QUESTION # 121
A network engineer must determine the cooling requirements for a Cisco UCS C-Series Rack Server. The server with PCIe cards is configured with a fan configuration policy. Which configuration should be used for the fan policy of the server?

A. Option B
B. Option D
C. Option A
D. Option C

Answer: C

NEW QUESTION # 122
Which configuration statically assigns VSAN membership to a virtual Fibre Channel interface?

A. switch<config-vsan-db)# vsan 100 bind interface vfc 31
B. switch(config-vsan-cb># vsan 100 bind interface fc 3/1
C. switch(config-vsan-db)# vsan 100 interface vfc 31
D. switch(config-vsan-db># vsan 100 fc 3/1

Answer: C

NEW QUESTION # 123
Which statement about the impact of a rolling EPLD upgrade on a Cisco MDS 9000 Series Switch is true?

A. Only the modules that are being upgraded are disrupted.
B. All modules on the switch are disrupted.
C. The upgrade can be performed from the standby supervisor module.
D. An EPLD upgrade is nondisruptive.

Answer: A

Explanation:
Section: Compute
Explanation/Reference:

NEW QUESTION # 124
An engineer must configure Cisco Nexus 9000 Series Switches for Cisco UCS Director integration The configuration must enable automated onboarding of the switches as they come online. For security purposes, the switches must have the bare minimum of connection methods enabled. The connection protocol must allow authentication through credentials. Which protocol must be configured on the switches to allow automated onboarding?

A. SNMP
B. SSH
C. HTTPS
D. Telnet

Answer: B

NEW QUESTION # 125
Refer to the exhibit.

What is the result of implementing this configuration?

A. The TACACS+ server uses the type-6 encrypted format.
B. The switch queries the TACACS+ server by using an encrypted text PAP login.
C. The timeout value on the TACACS+ server is 10 seconds.
D. The switch queries the TACACS+ server by using a clear text PAP login.

Answer: B

Explanation:
Explanation
tacacs-server key
To configure a global TACACS+ shared secret key, use the tacacs-server key command. To remove a configured shared secret, use the no form of this command.
tacacs-server key [0 | 7] shared-secret
Syntax Description
7 (Optional) Configures a preshared key specified in encrypted text to authenticate communication between the TACACS+ client and server.

NEW QUESTION # 126
DRAG DROP
Drag and drop the storage technologies from the left onto the correct descriptions on the right.
Select and Place:

Answer:

Explanation:

Section: Security

NEW QUESTION # 127
A host EDG Client wants to talk to a webserver in EGP Web. A contract with default settings is defined between EPG Client and EPG Web, which allows TCP communication initiated by the client toward the webserver with TCP destination port 80. Which statement is true?

A. If EPG Web is made a preferred group member, a contract between EPG Client and EPG Web is no longer required for the host is EPG Client and EPG Web is no longer required for the host in EPG Client to reach the webserver in EPG Web.
B. If vzAny is configured to consume and provide a "deny all" contract, traffic between EPG Client and EPG Web is no longer allowed.
C. The host in EPG Client Can connect to TCP destination port 80 on the webserver in EGP Web. The webserver can initiate a separate TCP connection to a host port with TCP source port 80.
D. The host in EPG Client can connect to TCP destination port 80 on the webserver in EPG Web. The webserver will not be able to initiate a separate TCP connection to a host port with TCP source port 80.

Answer: D

NEW QUESTION # 128
An engineer has a primary fabric that is named UCS-A and a secondary fabric that is named UCS-B. A certificate request that has a subject name of sjc2016 for a keyring that is named kr2016 needs to be created.
The cluster IP address is 10.68.68.68. Which command set creates this certificate request?
A)

B)

C)

D)

A. Option A
B. Option B
C. Option D
D. Option C

Answer: D

NEW QUESTION # 129
Drag and drop the characteristics from the left onto the NAS protocols on the right. Some characteristics are used more than once