2023 Correct Practice Tests of NSE5_FAZ-7.0 Dumps with Practice Exam
Certification Sample Questions of NSE5_FAZ-7.0 Dumps With 100% Exam Passing Guarantee
Fortinet NSE5_FAZ-7.0 certification exam is an excellent way for candidates to demonstrate their expertise in FortiAnalyzer 7.0. Fortinet NSE 5 - FortiAnalyzer 7.0 certification validates the candidate's ability to deploy, configure, and administer FortiAnalyzer effectively. It also highlights the candidate's skills in log management, event analysis, reporting, and threat detection using FortiAnalyzer.
NEW QUESTION # 16
What are the operating modes of FortiAnalyzer? (Choose two)
- A. Analyzer
- B. Manager
- C. Collector
- D. Standalone
Answer: A,C
NEW QUESTION # 17
What is the purpose of the following CLI command?
- A. To add a log file checksum
- B. To encrypt log communications
- C. To add a unique tag to each log to prove that it came from this FortiAnalyzer
- D. To add the MD's hash value and authentication code
Answer: A
Explanation:
https://docs2.fortinet.com/document/fortianalyzer/6.0.3/cli-reference/849211/global
NEW QUESTION # 18
Refer to the exhibit.
Which statement is correct regarding the event displayed?
- A. The security risk was blocked or dropped.
- B. The risk source is isolated.
- C. An incident was created from this event.
- D. The security event risk is considered open.
Answer: A
NEW QUESTION # 19
Why should you use an NTP server on FortiAnalyzer and all registered devices that log into FortiAnalyzer?
- A. To improve DNS response times
- B. To use real-time forwarding
- C. To resolve host names
- D. To properly correlate logs
Answer: D
NEW QUESTION # 20
In Log View, you can use the Chart Builder feature to build a dataset and chart based on the filtered search results.
Similarly, which feature you can use for FortiView?
- A. Export to Report Chart
- B. Export to Custom Chart
- C. Export to Chart Builder
- D. Export to PDF
Answer: A
NEW QUESTION # 21
What are two advantages of setting up fabric ADOM? (Choose two.)
- A. It can include all Fortinet devices that are part of the same Security Fabric
- B. It can include only FortiGate devices that are part of the same Security Fabric
- C. It can be used to facilitate communication between devices in same Security Fabric
- D. It can be used for fast data processing and log correlation
Answer: A,D
Explanation:
https://docs.fortinet.com/document/fortianalyzer/6.2.5/administration-guide/448471/creating-a-security-fabric-adom
NEW QUESTION # 22
In FortiAnalyzer's FormView, source and destination IP addresses from FortiGate devices are not resolving to a hostname. How can you resolve the source and destination IPs, without introducing any additional performance impact to FortiAnalyzer?
- A. Configure local DNS servers on FortiAnalyzer
- B. Resolve IPs on FortiGate
- C. Resolve IPs on a per-ADOM basis to reduce delay on FortiView while IPs resolve
- D. Configure # set resolve-ip enable in the system FortiView settings
Answer: B
NEW QUESTION # 23
What must you configure on FortiAnalyzer to upload a FortiAnalyzer report to a supported external server?
(Choose two.)
- A. Mail server
- B. Output profile
- C. SFTP, FTP, or SCP server
- D. Report scheduling
Answer: A,B
Explanation:
https://docs.fortinet.com/document/fortianalyzer/6.0.2/administration-guide/598322/creating-output-profiles
NEW QUESTION # 24
In order for FortiAnalyzer to collect logs from a FortiGate device, what configuration is required? (Choose two.)
- A. FortiGate must be registered with FortiAnalyzer
- B. Log encryption must be enabled
- C. Remote logging must be enabled on FortiGate
- D. ADOMs must be enabled
Answer: A,C
Explanation:
Pg 70: "after you add and register a FortiGate device with the FortiAnalyzer unit, you must also ensure that the FortiGate device is configured to send logs to the FortiAnalyzer unit."
https://docs.fortinet.com/uploaded/files/4614/FortiAnalyzer-5.4.6-Administration%20Guide.pdf Pg 45: "ADOMs must be enabled to support the logging and reporting of NON-FORTIGATE devices, such as FortiCarrier, FortiClientEMS, FortiMail, FortiWeb, FortiCache, and FortiSandbox."
NEW QUESTION # 25
When working with FortiAnalyzer reports, what is the purpose of a dataset?
- A. To set the data included in templates
- B. To retrieve data from the database
- C. To provide the layout used for reports
- D. To define the chart type to be used
Answer: B
Explanation:
Reference:
Datasets: Structured Query Language (SQL) SELECT queries that extract specific data from the database
NEW QUESTION # 26
When working with FortiAnalyzer reports, what is the purpose of a dataset?
- A. To set the data included in templates
- B. To retrieve data from the database
- C. To provide the layout used for reports
- D. To define the chart type to be used
Answer: B
NEW QUESTION # 27
View the exhibit:
What does the 1000MB maximum for disk utilization refer to?
- A. The disk quota for each device in the ADOM
- B. The disk quota for the FortiAnalyzer model
- C. The disk quota for all devices in the ADOM
- D. The disk quota for the ADOM type
Answer: C
Explanation:
https://docs.fortinet.com/document/fortianalyzer/6.2.0/administration-guide/743670/configuring-log-storage-policy
NEW QUESTION # 28
Which statement is true regarding Macros on FortiAnalyzer?
- A. Macros are useful in generating excel log files automatically based on the reports settings.
- B. Macros are ADOM specific and each ADOM will have unique macros relevant to that ADOM.
- C. Macros are predefined templates for reports and cannot be customized.
- D. Macros are supported only on the FortiGate ADOM.
Answer: B
NEW QUESTION # 29
What is the purpose of the following CLI command?
- A. To add a log file checksum
- B. To encrypt log communications
- C. To add a unique tag to each log to prove that it came from this FortiAnalyzer
- D. To add the MD's hash value and authentication code
Answer: A
Explanation:
https://docs2.fortinet.com/document/fortianalyzer/6.0.3/cli-reference/849211/global
NEW QUESTION # 30
Which two methods can you use to send event notifications when an event occurs that matches a configured event handler? (Choose two.)
- A. SMS
- B. IM
- C. SNMP
- D. Email
Answer: C,D
Explanation:
Reference:
FortiAnalyzer_Admin_Guide/1800_Events/0200_Event_handlers/0600_Create_event_handlers.htm
NEW QUESTION # 31
Which statement correctly describes the management extensions available on FortiAnalyzer?
- A. Management extensions do not require additional licenses.
- B. Management extensions require a dedicated VM for best performance.
- C. Management extensions may require a minimum number of CPU cores to run.
- D. Management extensions allow FortiAnalyzer to act as a ForbSIEM supervisor.
Answer: C
Explanation:
Events in FortiAnalyzer will be in one of four statuses. The current status will determine if more actions need to be taken by the security team or not.
The possible statuses are:
Unhandled: The security event risk is not mitigated or contained, so it is considered open.
Contained: The risk source is isolated.
Mitigated: The security risk is mitigated by being blocked or dropped.
(Blank): Other scenarios.
FortiAnalyzer_7.0_Study_Guide-Online pag. 189.
FortiAnalyzer_7.0_Study_Guide-Online.pdf page 189: Review the hardware requirements before you enable a management extension application. Some of them require a minimum amount of memory or a minimum number of CPU cores.
NEW QUESTION # 32
View the exhibit.
What does the data point at 14:35 tell you?
- A. The sqlplugind daemon is ahead in indexing by one log.
- B. FortiAnalyzer is indexing logs faster than logs are being received.
- C. FortiAnalyzer has temporarily stopped receiving logs so older logs' can be indexed.
- D. FortiAnalyzer is dropping logs.
Answer: B
Explanation:
https://docs.fortinet.com/document/fortianalyzer/6.2.5/administration-guide/47690/insert-rate-vs-receive-rate-widget
NEW QUESTION # 33
For which two SAML roles can the FortiAnalyzer be configured? (Choose two.)
- A. Identity provider
- B. Service provider
- C. Identity collector
- D. Principal
Answer: A,B
Explanation:
Reference:
20the%20identity%20provider%20(IdP,external%20identity%20provider%20is%20available.
https://docs.fortinet.com/document/fortianalyzer/6.2.0/administration-guide/981386/saml-admin-authentication In FortiAnalyzer, SAML can be enabled across all Security Fabric devices, enabling smooth movement between devices for the administrator by means of single sign-on (SSO).
FortiAnalyzer can play the role of the identity provider (IdP), the service provider (SP), or Fabric SP, when an external identity provider is available.
FortiAnalyzer_7.0_Study_Guide-Online pag. 48
NEW QUESTION # 34
What is the purpose of employing RAID with FortiAnalyzer?
- A. To back up your logs
- B. To introduce redundancy to your log data
- C. To separate analytical and archive data
- D. To provide data separation between ADOMs
Answer: B
Explanation:
https://en.wikipedia.org/wiki/RAID#:~:text=RAID%20(%22Redundant%20Array%20of%20Inexpensive,%2C%20performance%20improvement%2C%20or%20both.
NEW QUESTION # 35
What is the purpose of a dataset query in FortiAnalyzer?
- A. It retrieves log data from the database
- B. It injects log data into the database
- C. It sorts log data into tables
- D. It extracts the database schema
Answer: A
NEW QUESTION # 36
An administrator fortinet, is able to view logs and perform device management tasks, such as adding and removing registered devices. However, administrator fortinet is not able to create a mall server that can be used to send email.
What could be the problem?
- A. ADOM mode is configured with Advanced mode.
- B. Fortinet is assigned the Standard_ User administrator profile.
- C. Fortinet is assigned the Restricted_ User administrator profile.
- D. A trusted host is configured.
Answer: B
Explanation:
* Super_User, which, like in FortiGate, provides access to all device and system privileges.
* Standard_User, which provides read and write access to device privileges, but not system privileges.
* Restricted_User, which provides read access only to device privileges, but not system privileges. Access to the Management extensions is also removed.
* No_Permissions_User, which provides no system or device privileges. Can be used, for example, to temporarily remove access granted to existing admins.
FortiAnalyzer_7.0_Study_Guide-Online page 42
NEW QUESTION # 37
Which two statements are correct regarding the export and import of playbooks? (Choose two.)
- A. You can export only one playbook at a time.
- B. You can import a playbook even if there is another one with the same name in the destination.
- C. Playbooks can be exported and imported only within the same FortiAnaryzer.
- D. A playbook that was disabled when it was exported, will be disabled when it is imported.
Answer: B,D
NEW QUESTION # 38
View the exhibit.
What does the data point at 14:35 tell you?
- A. The sqlplugind daemon is ahead in indexing by one log.
- B. FortiAnalyzer is indexing logs faster than logs are being received.
- C. FortiAnalyzer has temporarily stopped receiving logs so older logs' can be indexed.
- D. FortiAnalyzer is dropping logs.
Answer: B
Explanation:
https://docs.fortinet.com/document/fortianalyzer/6.2.5/administration-guide/47690/insert-rate-vs-receive-rate-widget
NEW QUESTION # 39
Refer to the exhibit.
Which two statements are true regarding enabling auto-cache on FortiAnalyzer? (Choose two.)
- A. This feature is automatically enabled for scheduled reports.
- B. Report size will be optimized to conserve disk space on FortiAnalyzer.
- C. Reports will be cached in the memory.
- D. Enabling auto-cache reduces report generation time for reports that require a long time to assemble datasets.
Answer: A,D
NEW QUESTION # 40
For proper log correlation between the logging devices and FortiAnalyzer, FortiAnalyzer and all registered devices should:
- A. Use an NTP server
- B. Use host name resolution
- C. Use real-time forwarding
- D. Use DNS
Answer: A
NEW QUESTION # 41
......
Fortinet NSE5_FAZ-7.0 certification is a valuable credential for IT professionals who work with FortiAnalyzer 7.0. Fortinet NSE 5 - FortiAnalyzer 7.0 certification demonstrates that the individual has the knowledge and skills to manage and analyze security information effectively. To pass the exam, candidates should have a strong understanding of FortiAnalyzer 7.0 and take advantage of the various training resources available.
Fortinet NSE 5 - FortiAnalyzer 7.0 exam covers a wide range of topics related to network security, including network security design, implementation, and management. It is designed to test your knowledge of the FortiAnalyzer platform, including its features and capabilities. You will be tested on your ability to configure FortiAnalyzer systems, generate reports, and analyze network traffic data. Additionally, you will be expected to demonstrate your understanding of network security protocols and best practices.
NSE5_FAZ-7.0 Sample Practice Exam Questions 2023 Updated Verified: https://practicetorrent.exam4pdf.com/NSE5_FAZ-7.0-dumps-torrent.html
