201 PDF Pass Leader, 201 Latest Real Test
Valid 201 Test Answers & 201 Exam PDF
NEW QUESTION # 71
A custom HTTP monitor is failing to a pool member 10.10.3.75:8080 that serves up www.example.com.
A ping works to the pool member address.
The SEND string that the monitor is using is: GET/HTTP/l.l/r/n/Host.www.example.com/r/n/Connection Close/r/n/r/n Which CLI tool syntax will show that the web server returns the correct HTTP response?
- A. tracepath 'http://www.example.com:80
- B. curlhttp://10.10.10.3.75:8080/www.example.com/index.html
- C. tracepath 10.10.3.75:8080 GET /index
- D. curl-header 'Host:www.example.com' http://10.10.3.75:8080/
Answer: D
NEW QUESTION # 72
A BIG-IP Administrator plans to upgrade a BIG-IP device to the latest TMOS version.
Which two tools could the administrator leverage to verify known issues for the target versions?
(Choose two.)
- A. F5 Downloads
- B. F5 Bug Tracker
- C. F5 University
- D. F5 End User Diagnostics (EUD)
- E. FSiHealth
Answer: B,E
Explanation:
Explanation
F5 University -- F5 learning materials
F5 Downloads - iso download page
F5 End User Diagnostics (EUD) -- Hardware detection
NEW QUESTION # 73
You need to terminate client SSL traffic at the BIGElIP and also to persist client traffic to the same pool member based on a BIGElIP supplied cookie. Which four are profiles that would normally be included in the virtual server's definition. (Choose four.)
- A. ServerSSL
- B. HTTP
- C. ClientSSL
- D. TCP
- E. HTTPS
- F. CookieElBased Persistence
Answer: B,C,D,F
NEW QUESTION # 74
Assuming that systems are synchronized, which action could take place if the fail over cable is connected correctly and working properly, but the systems cannot communicate over the network due to external network problems?
- A. If network failover is enabled, the standby system will assume the active mode.
- B. If network failover is enabled, the standby system will go into active mode but only until the network recovers.
- C. Whether or not network failover is enabled, the standby system will stay in standby mode.
- D. Whether or not network failover is enabled, the standby system will assume the active mode.
Answer: C
NEW QUESTION # 75
An IT support engineer needs to access and modify Virtual Servers in three partitions (Common /Banking and Dev) daily on a BIG-IP device. The company operates a Least Privilege access policy. What level of access does the IT support engineer need to ensure completion of daily roles?
- A. Application Editor in /Common, /Banking, and /Dev partitions
- B. Manager in /common/Banking, and /Dev partitions
- C. Manager in all partitions
- D. Application Editor in all partitions
Answer: B
NEW QUESTION # 76
Some users who connect to a busy Virtual Server have connections reset by the BIG-IP system. Pool member resources are NOT a factor in this behavior. What is a possible cause for this behavior?
- A. The server SSL Profile has NOT been reconfigured.
- B. The Rewrite Profile has NOT been configured.
- C. The Connection Limit is set too low.
- D. The Connection Rate Limit is set too high
Answer: C
Explanation:
The topic explains that the connection reset behavior is caused by the vs configuration rather than the server resource problem. The answers B C are all configuration at the service forwarding level. If there is a problem with the configuration, it is all a problem rather than some users. Answer C's Connection Limit will cause a reset behavior when the connection reaches the threshold.
NEW QUESTION # 77
A BIG-IP Administrator finds the following log entry after a report of user issues connecting to a virtual server:
01010201: 2: Inet port exhaustion on 10.70.110.112 to 192.28.123.250:80 (proto 6) How should the BIG-IP Administrator modify the SNAT pool that is associated with the virtual server?
- A. Add an address to the SNAT pool.
- B. Increase the timeout of the SNAT addresses.
- C. Remove the SNAT pool and apply SNAT Automap.
- D. Remove an IP address from the SNAT pool.
Answer: A
NEW QUESTION # 78
Under what condition must an appliance license be reactivated?
- A. Licenses generally have to be reactivated during system software upgrades.
- B. Licenses only have to be reactivated when new features are added (IPv6, Routing Modules, etc) no other situations.
- C. Licenses only have to be reactivated for RMAs no other situations.
- D. Never. Licenses are permanent for the platform regardless the version of software installed.
Answer: A
NEW QUESTION # 79
When can a single virtual server be associated with multiple profiles.
- A. Often. Profiles work on different layers and combining profiles is common.
- B. Never. Each virtual server has a maximum of one profile.
- C. Rarely. One combination, using both the TCP and HTTP profile does occur, but it is the exception.
- D. Unlimited. Profiles can work together in any combination to ensure that all traffic types are supported in a given virtual server.
Answer: A
NEW QUESTION # 80
Which two statements are true about SNATs. (Choose two.)
- A. SNATs can be configured within a Profile definition.
- B. SNAT's are enabled only on the VLAN where origin traffic arrives, by default
- C. SNATs are enabled on all VLANs, by default.
- D. SNATs can be configured within a Virtual Server definition.
Answer: C,D
NEW QUESTION # 81
You have a pool of servers that need to be tested. All of the servers but one should be tested every 10 seconds, but one is slower and should only be tested every 20 seconds. How do you proceed.
- A. It cannot be done. All of the members of a pool must be tested at the same frequency.
- B. It can be done by assigning one monitor to the pool and a different monitor to the slower pool member.
- C. It can be done, but will require assigning monitors to each pool member.
- D. It cannot be done. All monitors test every five seconds.
Answer: B
NEW QUESTION # 82
Where is connection mirroring configured.
- A. It an option within a TCP profile.
- B. It is not configured; it is default behavior.
- C. It is an optional feature of each virtual server.
- D. It is an optional feature of each pool.
Answer: C
NEW QUESTION # 83
An LTM device has a virtual server mapped to www5f.com with a pool assigned. The objects are defined as follows:
Virtual server. Destination 192.168.245.100.443 netmask 255.255.255.0
Persistence: Source address persistence netmask 255.0.0.0
SNAT:AutoMap
Profiles: HnP/TCP
How should the BIG-IP Administrator modify the persistence profile so that each unique IP address creates a persistence record?
- A. netmask 255.255.255.255
- B. netmask 0.0.0.0
- C. netmask 255.256.255.0
- D. netmask 255.255.0.0
Answer: A
NEW QUESTION # 84
Which IP address will the client address be changed to when SNAT automap is specified within a Virtual Server configuration?
- A. The floating self-IP address on the VLAN where the packet arrives on the system.
- B. The floating self-IP address on the VLAN where the packet leaves the system.
- C. It will alternate between the floating and non floating self-IP address on the VLAN where the packet arrives on the system so that port exhaustion is avoided.
- D. It will alternate between the floating and non floating self-IP address on the VLAN where the packet leaves the system so that port exhaustion is avoided.
Answer: B
NEW QUESTION # 85
Which two can be a part of a virtual server's definition? (Choose two.)
- A. loadbalancing method(s)
- B. monitor(s)
- C. rule(s)
- D. node address(es)
- E. pool(s)
Answer: C,E
NEW QUESTION # 86
The current status of a given pool member is unknown. Which condition could explain that state?
- A. The member has no monitor assigned to it.
- B. The member's node has a monitor assigned to it and the monitor did not succeed during the most recent timeout period.
- C. The member has a monitor assigned to it and the most recent monitor was successful.
- D. The member has a monitor assigned to it and the monitor did not succeed during the most recent timeout period.
Answer: A
NEW QUESTION # 87
A standard virtual server has been associated with a pool with multiple members.
Assuming all other settings are left at their defaults, which statement is always true
concerning traffic processed by the virtual server.
- A. The IP addresses used in the clientElside connection are the same as the IP addresses used in the serverElside connection.
- B. The client IP address is unchanged between the cEl ls iedne t connection and the serverElside connection.
- C. The TCP ports used in the clienEl tside connection are the same as the TCP ports serverElside connection.
- D. The server IP address is unchanged between the cEl lis end te connection and the serverElside connection.
Answer: B
NEW QUESTION # 88
Some users who connect to a busy Virtual Server have connections reset by the BIG-IP system. Pool member resources are NOT a factor in this behavior. What is a possible cause for this behavior?
- A. The server SSL Profile has NOT been reconfigured.
- B. The Rewrite Profile has NOT been configured.
- C. The Connection Limit is set too low.
- D. The Connection Rate Limit is set too high
Answer: C
Explanation:
Explanation
The topic explains that the connection reset behavior is caused by the vs configuration rather than the server resource problem. The answers B C are all configuration at the service forwarding level. If there is a problem with the configuration, it is all a problem rather than some users. Answer C's Connection Limit will cause a reset behavior when the connection reaches the threshold.
NEW QUESTION # 89
A BIGJP Administrator needs to load a UCS file but must exclude the license file. How should the administrator perform this task?
- A. From the CLI with command U tmsh load /$ys ucs <ucs filename> no-license
- B. From the GUI, select the UCS file and click restore
- C. From the CLI with command(tmos) tmsh load /sys ucs <ucs filename> no-license
- D. From the GUI, select the UCS file, unchcck the license box, and click restore
Answer: A
NEW QUESTION # 90
Which three iRule events are likely to be seen in iRules designed to select a pool for load balancing. (Choose 3)
- A. SERVER_DATA
- B. CLIENT_ACCEPTED
- C. SERVER_CONNECTED
- D. SERVER_SELECTED
- E. CLIENT_DATA
- F. HTTP_RESPONSE
- G. HTTP_REQUEST
Answer: B,E,G
NEW QUESTION # 91
A BIG-IP Administrator is conducting maintenance on one BIG-IP appliance in an HA Pair. Why should the BIG-IP Administrator put the appliance into FORCED_OFFLINE state?
- A. To preserve existing connections to Virtual Servers and reduce the CPU load
- B. To terminate connections to the management IP and decrease persistent connections
- C. To terminate existing connections to Virtual Servers and prevent the appliance from becoming active
- D. To allow new connections to Virtual Servers and ensure the appliance becomes active
Answer: C
NEW QUESTION # 92
Users report that traffic is negatively affected every time a BIG-IP device fails over. The traffic becomes stabilized after a few minutes.
What should the BIG-IP Administrator do to reduce the impact of future failovers?
- A. Configure MAC Masquerade
- B. Enable Failover Multicast Configuration
- C. Configure a global SNAT Listener
- D. Set up Failover Method to HA Order
Answer: A
NEW QUESTION # 93
......
201 Dumps Ensure Your Passing: https://practicetorrent.exam4pdf.com/201-dumps-torrent.html
