100% Pass Top-selling FCP_FSM_AN-7.2 Exams - New 2026 Fortinet Pratice Exam [Q14-Q35]

100% Pass Top-selling FCP_FSM_AN-7.2 Exams - New 2026 Fortinet Pratice Exam

Fortinet Certified Professional Security Operations Dumps FCP_FSM_AN-7.2 Exam for Full Questions - Exam Study Guide

NEW QUESTION # 14
Refer to the exhibit.

Which two lookup types can you reference as the subquery in a nested analytics query? (Choose two.)

• A. Event Query
• B. CMDB Query
• C. LDAP Query
• D. SNMP Query

Answer: A,D

Explanation:
In FortiSIEM nested analytics queries, you can reference both CMDB Queries and Event Queries as subqueries. These allow correlation between CMDB data and event data for advanced detection use cases.

NEW QUESTION # 15
Which analytics search can be used to apply a user and entity behavior analytics (UEBA) tag to an event for a failed login by the user JSmith?

• A. Username NOT END WITH jsmith
• B. User IS jsmith
• C. User = smith
• D. Username CONTAIN smit

Answer: B

Explanation:
The correct syntax to match an exact username in FortiSIEM analytics search is User IS jsmith. This ensures that the UEBA tag is applied only when the event is specifically tied to the user "jsmith", which is required for accurate behavioral analytics.

NEW QUESTION # 16
Refer to the exhibit.

An analyst is troubleshooting the rule shown in the exhibit. It is not generating any incidents, but the filter parameters are generating events on the Analytics tab.
What is wrong with the rule conditions?

• A. The Aggregate attribute is too restrictive.
• B. The Destination Host Name value is not fully qualified.
• C. The Event Type refers to a CMDB lookup and should be an Event lookup.
• D. The Group By attributes restricts which events are counted.

Answer: D

Explanation:
The Group By attributes - Destination IP and User - cause the aggregation (COUNT(Source IP) >= 2) to apply within each unique combination of those groupings. This restricts the count calculation and can prevent the rule from triggering incidents, even if matching events exist in the Analytics tab.

NEW QUESTION # 17
What are two required components of a rule? (Choose two.)

• A. Detection Technology
• B. Exception policy
• C. Clear policy
• D. Subpattern

Answer: A,D

Explanation:
A Subpattern defines the specific conditions or event patterns the rule is designed to detect, and the Detection Technology specifies the type of detection logic (e.g., real-time, historical). Both are essential for a rule to function in FortiSIEM.

NEW QUESTION # 18
Refer to the exhibit.

A FortiSIEM device is receiving syslog events from a FortiGate firewall. The FortiSIEM analyst is trying to search the raw event logs for the last two hours that contain the keyword "udp". However, they are getting no results from the search, which they know should be available. Based on the filter shown in the exhibit, why are there no search results?

• A. The keyword is case sensitive. Instead of typing udp in the Value field, the analyst should type UDP.
• B. The analyst selected = in the Operator column. That is the wrong operator.
• C. The analyst selected AND in the Next column. This is the wrong Boolean operator.
• D. The Time Range value should be set to Real-Time.

Answer: B

Explanation:
The operator is set to "=", which performs an exact match on the entire raw event log, not a substring search. To find logs that contain the keyword "udp", the analyst should use the CONTAIN operator instead. This will return all logs where "udp" appears anywhere in the raw log message.

NEW QUESTION # 19
Refer to the exhibit.

If you group the events by User and Count attributes, how many results will FortiSIEM display?

• A. One
• B. Three
• C. Six
• D. Five
• E. Two

Answer: D

Explanation:
Grouping by User and Count yields five unique pairs: (Mike,4), (Bob,3), (Alice,2), (Bob,6), (Mike,5).

NEW QUESTION # 20
Which running mode takes the most time to perform machine learning tasks?

• A. Forecasting
• B. Regression
• C. Local
• D. Local auto

Answer: C

Explanation:
In Local mode, FortiSIEM performs machine learning tasks using the full dataset without optimization shortcuts, making it the most time-consuming mode compared to Local Auto, Forecasting, or Regression.

NEW QUESTION # 21
Refer to the exhibit.

What is the Group: FortiSIEM Analysts value referring to?

• A. Windows Active Directory user group
• B. FortiSIEM organization group
• C. LDAP user group
• D. CMDB user group

Answer: D

Explanation:
In FortiSIEM, the value Group: FortiSIEM Analysts under the User attribute refers to a CMDB user group. These groups are defined within FortiSIEM's CMDB and used to logically organize users for analytics, correlation rules, and reporting.

NEW QUESTION # 22
Refer to the exhibit.

The configuration shown in the exhibit is incorrect.
What must you change to allow this configuration to be successfully applied to FortiSIEM?

• A. Run Mode must be set to ML.
• B. The selection in Fields to use for Prediction and Field to Predict must match.
• C. The Train factor must be 70% or greater.
• D. Only one AVG type field must be selected under Fields to use for Prediction.

Answer: A

Explanation:
The Run Mode is set to Local, which is not valid for training machine learning models in FortiSIEM. To apply this configuration correctly, the Run Mode must be set to ML, which enables proper model training and prediction using selected fields.

NEW QUESTION # 23
Refer to the exhibit.

According to the automation policy configuration shown in the exhibit, what happens if an associated rule triggers?

• A. FortiSIEM performs all selected actions.
• B. FortiSIEM sends an email, because that is first on the list.
• C. FortiSIEM fails to the integration policy, because no policy is defined.
• D. FortiSIEM runs the remediation script, because that takes precedence over all other options.

Answer: A

Explanation:
When an associated rule triggers, FortiSIEM performs all selected actions in the automation policy. In this case, it will send an email/SMS/webhook, run the remediation script, invoke the integration policy (even if none is currently defined), and create a case. All checked actions are executed.

NEW QUESTION # 24
Refer to the exhibit.

If a rule containing the automation policy shown in the exhibit triggers, what will happen?

• A. Associated source IP addresses will be blocked on devices in the Aviation organization.
• B. Associated source IP addresses will be blocked on devices in the Network CMDB group.
• C. Associated source IP addresses will be blocked on two FortiGate firewalls.
• D. Associated source IP addresses will be blocked on all FortiGate firewalls.

Answer: C

Explanation:
The automation policy is configured to run a remediation script named "Fortinet FortiOS - Block Source IP FortiOS via API". It specifies enforcement on two FortiGate devices: FortiGate508 and FortiGate90D. Therefore, associated source IP addresses will be blocked on those two FortiGate firewalls only.

NEW QUESTION # 25
Which two settings must you configure to allow FortiSIEM to apply tags to devices in FortiClient EMS? (Choose two.)

• A. ZTNA tags defined on FortiSIEM
• B. FortiSIEM API credentials defined on FortiEMS\
• C. Remediation script configured
• D. FortiEMS API credentials defined on FortiSIEM

Answer: B,D

Explanation:
To allow FortiSIEM to apply tags to devices in FortiClient EMS, FortiEMS API credentials must be defined on FortiSIEM to enable communication with EMS, and FortiSIEM API credentials must be defined on FortiEMS to allow EMS to accept tagging instructions from FortiSIEM. This bidirectional API trust is essential for tag application.

NEW QUESTION # 26
Refer to the exhibit.

Which value would you expect the FortiSIEM parser to use to populate the Application Name field?

• A. SSL
• B. applist
• C. wan1
• D. Network.Service

Answer: A

Explanation:
The Application Name field in FortiSIEM is typically populated using the value of the app field in the raw log. In this event, app="SSL", so "SSL" is the expected application name parsed by FortiSIEM.

NEW QUESTION # 27
Which statement about thresholds is true?

• A. FortiSIEM uses global and per device thresholds for performance metrics.
• B. FortiSIEM uses fixed, hardcoded global and device thresholds for all performance metrics.
• C. FortiSIEM uses only device thresholds for security metrics.
• D. FortiSIEM uses only global thresholds for performance metrics.

Answer: A

Explanation:
FortiSIEM evaluates performance metrics against both global thresholds, which apply system-wide, and per-device thresholds, which can be customized for individual devices. This dual approach allows flexibility in monitoring while ensuring consistent baseline alerting.

NEW QUESTION # 28
......

Fortinet FCP_FSM_AN-7.2 Exam Syllabus Topics:

Topic	Details
Topic 1	Rules and subpatterns: This section of the exam measures the skills of SOC Engineers and focuses on the construction and implementation of analytics rules. It involves identifying the different components that make up a rule, utilizing advanced features like subpatterns and aggregation, and practically configuring these rules within the FortiSIEM platform to detect security events.
Topic 2	Incidents, notifications, and remediation: This section of the exam measures the skills of Incident Responders and encompasses the entire incident management lifecycle. This includes the skills required to manage and prioritize security incidents, configure policies for alert notifications, and set up automated remediation actions to contain and resolve threats.
Topic 3	Analytics: This section of the exam measures the skills of Security Analysts and covers the foundational techniques for building and refining queries. It focuses on creating searches from events, applying grouping and aggregation methods, and performing various lookup operations, including CMDB and nested queries to effectively analyze and correlate data.
Topic 4	Machine learning, UEBA, and ZTNA: This section of the exam measures the skills of Advanced Security Architects and covers the integration of modern security technologies. It involves performing configuration tasks for machine learning models, incorporating UEBA (User and Entity Behavior Analytics) data into rules and dashboards for enhanced threat detection, and understanding how to integrate ZTNA (Zero Trust Network Access) principles into security operations.

 

Authentic Best resources for FCP_FSM_AN-7.2 Online Practice Exam: https://practicetorrent.exam4pdf.com/FCP_FSM_AN-7.2-dumps-torrent.html